How to prevent premature wear in stainless steel components

Geplaatst op 29-10-2026

Categorie: Zakelijk

Stainless steel is widely used in industrial machinery because of its corrosion resistance, cleanability and ability to perform in demanding environments. However, choosing stainless steel does not automatically guarantee long-lasting mechanical performance. Components exposed to repeated movement, friction or mechanical contact can experience unexpected wear, even when corrosion is not a concern. This creates challenges for manufacturers of pumps, valves, production machinery and precision equipment. Understanding why stainless steel wears and how surface properties can be improved helps engineers design more reliable components and reduce maintenance requirements.

Why can stainless steel wear despite its corrosion resistance?

Corrosion resistance and wear resistance are two different material properties. Austenitic stainless steels, including commonly used grades such as AISI 304 and 316, are valued for their ability to withstand moisture, cleaning agents and various corrosive environments. Their relatively low surface hardness, however, can make them vulnerable to mechanical damage.

When two components repeatedly slide against each other, friction generates local stresses at their contact surfaces. Small surface irregularities can deform, transfer material or gradually deteriorate. Over time, this can result in increased clearances, rougher surfaces and reduced mechanical efficiency.

The challenge is particularly relevant in equipment that combines frequent movement with strict hygiene or corrosion requirements. In these situations, replacing stainless steel with a harder material is not always practical.

One possible engineering solution is to harden stainless steel through a specialised surface treatment. Low-temperature diffusion processes can increase surface hardness while preserving the corrosion-resistant properties that made the material suitable for the application in the first place.

What causes galling in moving stainless steel parts?

Galling is a specific form of adhesive wear that occurs when contacting metal surfaces slide against each other under load. Austenitic stainless steel can be particularly susceptible to this phenomenon, especially when similar stainless steel surfaces are paired.

Under pressure, microscopic contact points may adhere to one another. Continued movement can tear these connections apart, transferring material between surfaces and producing scratches or raised areas.

In severe cases, galling can eventually lead to seizure, preventing components from moving as intended.

Components where galling can become a problem

The risk is especially relevant for:

Surface condition, contact pressure, material pairing, lubrication and operating temperature all influence the likelihood of galling. Effective prevention therefore requires more than selecting a corrosion-resistant alloy.

How does surface hardness influence component lifespan?

Surface hardness describes a material's resistance to local deformation and indentation. In mechanical assemblies, improving this property can help reduce certain forms of wear and surface damage.

However, hardness alone does not determine service life. The loading conditions, contact geometry, lubrication and hardness depth must also be considered.

For example, a hard surface layer can improve resistance to adhesive or abrasive wear, but it cannot compensate for a poorly designed bearing arrangement or excessive mechanical loads.

Why the depth of the hardened layer matters

Surface hardening treatments modify a limited region near the exterior of the component. The resulting layer must be suitable for the stresses experienced during operation.

A thin hardened zone may provide substantial benefits for precision sliding contact. Applications involving significant impact, deformation or deep abrasive damage may require a different material or treatment strategy.

For this reason, engineers should evaluate the complete component rather than treating maximum hardness as the only objective.

How can stainless steel be hardened without losing corrosion resistance?

Conventional high-temperature treatments can create difficulties when applied to austenitic stainless steel. At unsuitable temperatures, chromium may react with nitrogen or carbon and form precipitates that reduce the chromium available to maintain corrosion resistance.

Specialised low-temperature thermochemical treatments address this challenge by controlling the diffusion of nitrogen and carbon into the surface.

One example is Stainihard® NC, developed by Aalberts Surface Technologies. This process operates below 450°C and creates an expanded austenite zone, also called the S-phase.

The resulting surface can reach approximately 1100–1400 HV0.05, depending on material and treatment conditions. The hardened layer typically extends around 10–30 micrometres beneath the surface.

Unlike a conventional deposited coating, the modified zone is formed within the existing stainless steel surface. The process is designed to improve wear performance without reducing corrosion resistance.

This approach is particularly relevant where manufacturers need a combination of surface hardness, dimensional stability and corrosion protection.

Which industries benefit from improved stainless steel wear resistance?

The value of surface treatment becomes clearer when considering the operating conditions of specific industrial applications.

Industry Typical components Main engineering concern
Food processing Valves, dosing systems, machine components Wear resistance combined with cleanability
Chemical processing Pump and valve assemblies Corrosion resistance and mechanical contact
Packaging machinery Guiding elements and sliding components Repeated movement and friction
Precision engineering Shafts, fittings and mechanical assemblies Dimensional accuracy and surface durability
Medical equipment Selected stainless steel precision parts Surface integrity and material performance

Not every component in these industries requires additional hardening. The decision depends on the mechanical loading, material grade, hygiene requirements and expected operating life.

For example, a stationary stainless steel tank may perform perfectly without surface modification. A moving stainless steel valve component in the same production facility may experience significant wear and benefit from a different surface condition.

What should engineers consider before selecting a surface treatment?

A surface treatment should be selected during the design process rather than automatically added after manufacturing.

Important questions include the intended contact pressure, operating temperature, expected movement, lubrication conditions and acceptable dimensional changes.

Material selection is equally important. Treatments developed for austenitic and duplex stainless steels do not necessarily produce the same results on every alloy.

Surface finish and prior mechanical deformation can also influence the final hardened layer. Components with different manufacturing histories may respond differently to an otherwise identical treatment.

When evaluating whether to harden stainless steel, engineers should therefore examine the component's complete operating environment and consult the treatment provider about material compatibility, achievable case depth and expected performance.

This helps avoid unnecessary processing while ensuring that components with demanding wear requirements receive suitable protection.

How can manufacturers reduce maintenance through better material performance?

Unexpected equipment maintenance often starts with relatively small changes in component condition. Increased friction, surface scoring or excessive clearance can gradually affect the performance of an entire mechanical assembly.

Preventing wear at an early stage can therefore offer benefits beyond the individual component.

A longer-lasting valve stem, for example, may reduce the frequency of maintenance interventions and help maintain consistent machine operation. In automated production environments, avoiding unplanned downtime can be particularly valuable.

The economic benefit should nevertheless be evaluated realistically. Surface treatment introduces additional manufacturing costs, making it important to compare the treatment expense with potential savings in replacement parts, maintenance and production interruptions.

For components with minimal mechanical contact, the additional cost may not be justified. For frequently moving, high-value parts, improving surface durability can be an effective long-term decision.

Frequently asked questions about stainless steel wear

Is stainless steel naturally wear-resistant?

Stainless steel offers excellent corrosion resistance, but its wear resistance depends on the alloy and operating conditions. Austenitic grades such as 304 and 316 can be vulnerable to adhesive wear and galling.

Can surface hardening prevent galling completely?

Surface hardening can significantly improve resistance to galling, but it cannot eliminate every risk. Contact pressure, material pairing, lubrication and component geometry remain important.

Does hardening stainless steel change its dimensions?

Specialised low-temperature diffusion treatments are designed to maintain good dimensional and shape stability. Nevertheless, component tolerances should always be checked against the specific treatment requirements.

Is surface hardening the same as applying a coating?

No. A coating introduces a separate material layer onto the surface. Diffusion-based surface hardening modifies the existing material near its surface, creating a hardened zone without depositing a conventional coating.

Designing stainless steel components for long-term reliability

Reliable stainless steel components require a balance between corrosion resistance, mechanical strength, wear behaviour and manufacturing costs. Selecting an appropriate stainless steel grade is the starting point, but it is not always the final step.

By considering friction and surface loading during the design phase, engineers can identify where additional protection is technically worthwhile. The combination of suitable material selection, sound mechanical design and an appropriate surface treatment can help industrial components maintain their performance over a longer service life.